S
U
P
P
O
R
T
Solar Power Pack 12V/10A
Solar Power Pack 12V/10A
Solar Power Pack 12V/10A

Solar Power Pack

Solar Power Pack 12V/10A

UTL Solar Power Pack is an integrated system consisting of Solar charge controller and Grid charger. For increasing the battery life, Solar Power Pack provides Smart Charging Technique (Bulk, Float and absorption). If battery voltage is charged to preset level, Solar Power Packgoes to cut-off mode and it disconnects the power from Solar or Mains.

Solar Power Pack is hybrid battery charger and DC power solution for DC equipment. It can provide power to battery and DC equipment using both solar as well as AC mains supply. Solar Powerpcak uses microcontroller based MPPT algorithm to maximise energy from solar PV array. It has a number of output ports for fan, light, mobile charging etc.

Download OQ Image

    PV Charging Efficiency >90%

    Efficiency of PV charging is greater than 90%. Thus Solar Powerpack gives optimum performance. [Top]

    LED Indication for Battery Charging and Battery Low

    Solar Powerpack has LED indications for Battery charging and Battery low conditions. [Top]

    Visual Display Parameters

    The following parameters can be visually read from Solar Powerpack display: Battery volt, charging %, charging current : main status: solar voltage, solar current : load voltage, load current [Top]

    Temperature Compensation for Charging/Discharging

    Solar Powerpack possesses Temperature compensation for charging/ discharging feature [Top]

    Small Size

    Solar Powerpack has a very small size and is thus easy to handle [Top]

    Light weight

    Solar Powerpack has very light weight. Therefore it is very easy to use and install. [Top]

    Solar Powerpack has the following protections:

    a. Reverse polarity of PV
    b. Reverse polarity of Battery
    c. Over current
    d. Over voltage
    e. Over load
    f. Load short circuit  
    g. Deep discharge
    h. Input surge voltage
    i. Protection against battery (night time leakage through PV)
    j. Load protections( LVD,LVR,HVD,HVR) [Top]
TECHNICAL SPECIFICATION
POWER PACK -2 HYBRID CHARGER
INPUT
Solar
Panel Open Ckt Voltage, Voc 21.6V
MPPT Volt., Vmp 16.4V
Max. Panel Wattage 150W
Mains
AC I/P Volt. 220V+/-10%
Max. Power 150W
OUTPUT
Battery
Batt. Charging Volt. 14V
Batt. Charging Current(Max) 10A
Ripple Volt. 50mv
Load
Load volt 12V
Max. load current 3.5A
Mobile charger
Voltage 5V
Current 1A
Visual Display on LCD
Solar Voltage, Solar Current
Battery Voltage, Battery Percentage(%), Battery Current,
Load Voltage, Load Current
Mains status
Temperature Compensation Battery Charging Y
Load Feature LVD, LVR, HVD, HVR Y
Data Logging By USB USB Interface(Optional)
PROTECTIONS
Battery Reverse Y
Solar short Circuit Y
Solar I/P Revese Polarity Y
O/P Short Circuit Y
O/p reverse polarity Y
Deep discharge Y
Protection agaist battery ( night time lickage current from PV) y
Solar Charging Current limit Y
LED status
LED1( Charging ON) Glow Solid(GREEN)
LED2( Battery Low) Glow Solid(RED)
Tranisent and Surge protection   Yes
Withstand Volt. 1.5KV
Efficiency(at full Load) >90%
Working Temperature -10°C to 50°C
Control algorithm Enhanced MPPT 
Be the first post your comments !!!
 
Name
Email
Your comments
Serial No of Product (optional)